In this Article we will understand the Steps to Configure Send/receive Email in a SAP System.
The steps are as below.
Step 1 :- Create a User(Ex:- mail_admin) with profile S_A.SCON
Step 2 :- Set the profile parameter to Enable the SMTP Port. (You can use any unused Port) in Instance Profile.
icm/server_port_1 PROT=SMTP,PORT=0,TIMEOUT=120,PROCTIMEOUT=120
Step 3 :- Activate the SMTP service in SICF
and check the settings of each tab and it should be as below
Enter the user ( mail_admin ) user that we created Earlier.
Step 4 :-Goto Tcode SCOT
(i) settings->default domain and type your Domain Name
example :- abcxyz.com
(ii) CREATE NODE FOR SMTP:-
On the left side of the screen you will see the menu
Under Setting->Outbound Messages->SMTP Node
select this and on the top left of screen menu
Nodes->Create
Then fill in the required Information in the screen like the Hostname/IP and the Port for the SMTP Server.
Then Click on the Set Button beside Internet under “Supported Address Types”.
and maintain the settings as below.
(iv) Schedule SAPCONNECT Job as standard job
Under Setting->Outbound Messages->
Click on Create> Schedule Job for All Address Type
create job for all types and select the variant “SAP&CONNECTALL”
(v) GOTO SMICM and Select goto->services and make sure the SMTP service is running fine.
You can test this Configuration for example by using the Tcode SBWP and try to send an email.
Ahmed Mohammed
SAP Basis Administrator
Bir Cevap Yazın